[Seç][/url]This kernel is mainly based in hardcore work (thank you to Hardcore for his great contributions). I have added undervolting (kind of phenomenal) and some additional features.
- CWM and TWRP recovery (thanks to Jeboo).
- install su, supersu. Support init.d and cifs
- UV Interface for ARM (you can change voltages in ARM with external aplications)
- Kernel Includes frandom for using with CrossBreeder (I really recomend it, Thx idcrisis)
[Seç][/url]There are some Apolo versions depending on the UV used:
- Light (stock voltages)
- Regular (-50mV in ARM, internals)
- Extreme (3 versions, you can try to see what versión is better for your battery life): in JB system chooses among the different steps available inside the kernel (in internal and ARM),
so depending what step is chosen, final voltages applied are different.
Regular and extreme has -50mv UV in GPU (others UV like bus, memory, video controller too). Light has stock voltages in GPU
I recommend you try regular version first. If there are no problems in two days (reboots or frozen screens) you can try extreme V0.
System changes voltages in some devices (new in JB). Android chooses among voltages included in kernel (8 steps in every frequency). I recommend not to change them in extrem versions.
Bugs
- Bootloops: it doesn't happend very often but it can happend in JB if there is something corrupt in partitions. Posible solutions:
[Seç][/url]1) Try to enter to recovery. Press vol up, Home button and Power button at the same time until the device enters into recovery (system can restart 2 or 3 times, but don't release buttons). Then wipe cache and dalvik and reboot.
2a) if 1) didn't work, enter into download mode and flash light TWRP version if you had CWM. Wipe cache and Dalvik and reinstall CWM if you wish.
2b) if TWRP didn't work or you had TWRP version already, flash last PhilZ kernel (thx to Phil3759), enter into Philz recovery and wipe cache and Dalvik. Then reinstall Apolo.
3) if nothing worked, try to reinstall your ROM without wipe data and wipe cache and Dalvik
4) wipe data (you will loose all your application and configurations)
5) reinstall with odin stock ROM WITH repartition (pit file). Then install Apolo and reinstall your custom ROM.
- Sometimes when you reboot your device, your battery seems to drop a lot (it is not real).
[Seç][/url]To recover your old battery percentage, plug in your device and reboot into recovery. Check your battery level in the recovery, if it is correct, reboot (solved).
If it is not, reboot into recovery again (in CWM advanced - reboot into recovery, in TWRP reboot - recovery). It should be solved.
This issue never happens if you reboot your device while is charging, so I recommend you plug in your device before rebooting (if you can do it)
If you can't plug in your device, don't reboot if you can avoid it
Alıntıdır.
Daha fazla bilgi için orjinal konu: http://forum.xda-developers.com/showthread.php?t=2291756 (http://forum.xda-developers.com/showthread.php?t=2291756)
--------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------------
Önemli Not:
-Samsung tabanlı romlar (4.1.2) için kernelin 4.x versiyonlarını,
-4.2.2 AOSP romlar için 5.x versiyonlarını,
-4.3 ve 4.3.1 AOSP romlar için 6.x versiyonlarını yüklüyoruz.
Kernel voltaj ayarlamalarına göre 5'e ayrılmış (indirme linkinde göreceksiniz). Kernelin sahibi önce "regular" versiyonu denemizi önermiş; donma veya takılma durumlarına göre "extreme" versiyonları deneyebilirmişiz (ben direk extrV2 yükledim sıkıntı olmadı).
Ayrıca bilmeyenler için linkte göreceğiniz "twrp" ibaresi, cwm'den farklı arayüze sahip bir recovery ekranıdır. Biraz karışık gelebilir, ben alışamadım, tavsiye etmiyorum.
Bunların dışında yapımcı yükleme öncesi kernel temizleme scripti kullanmamızı önermiş.
İndirme Linkleri:
- https://www.wuala.com/pedestre/Kernel/Apolo%20JB?key=IZz8nJ7ajpFQ (https://www.wuala.com/pedestre/Kernel/Apolo%20JB?key=IZz8nJ7ajpFQ)
- https://drive.google.com/folderview?id=0B2vvNPeYi5c1R1dIQ0ZPbFIwZk0&usp=sharing (https://drive.google.com/folderview?id=0B2vvNPeYi5c1R1dIQ0ZPbFIwZk0&usp=sharing)
Kernel ile ilgili ayarlama yapmak için https://play.google.com/store/apps/details?id=com.pedestre.confapolo&hl=tr (https://play.google.com/store/apps/details?id=com.pedestre.confapolo&hl=tr) bunu indiriyoruz.
Şahsen ben, daha önce @Captagon arkadaşın bir konudaki tavsiyesi üzerine sio/zzmove kombinasyonunu kullanıyorum batarya performansı için. Ona da buradan teşekkür etmiş olayım.